Cop-usa ASH56NVIR-36S Manuel d'utilisateur

Integral intelligent high speed pan/tilt camera Operating manual in English Prior to operation, please carefully read this manu

6 27× 30× 35× 36× Camera Day & night type Day & night type Day & night type Day & night typeSynchronous system Internal synchroniz

7 1.6 Pan/tilt functions The integral high speed pan/tilt is a high-tech monitoring product with high definition color camera, variable speed pan/ti

8 accurate searching of objectives. ¾ Integrates multiple protocols. The pan/tilt integrates the built-in multiple communication protocols, with bau

9 service life, low power, only up to 5W, its unique encapsulation technology may ensure 10000h optical attenuation ＜5%, and overcome the fatal short

10 1.6.8 Alarm input, output ¾ Four NO alarm input, closing alarm. ¾ One set of alarm output: NO and NC mode. ¾ After the system identified the

11 Chapter II Menu setting 2.1 System wiring diagram As the on-board pan/tilt operation diagram (to be added the shock isolator)—suitable for gene

12 2.2 Menu indexes:

13 2.3. Menu setting ¾ With control keyboard or matrix, open the setting main menu through “#64 and #95” commands. Moreover, the main menu may be a

14 patrol trajectory, the first line scan, the first self-learning. ¾ Alarm switch: alarm ON/OFF. Each alarm may be set independently. ¾ Return to

15 2.3.4 Camera setting: if the parameter setting option is void, it means that the current camera does not support this function. ¾ Digital magni

Safety attentions: A flash of light in equilateral triangle is used for reminding user that “there are non-insulated dangerous voltage points near

16 2.3.5 Motion seting ¾ Preset header: enter the preset setting submenu. ¾ Preset number: Edit the preset number. 1～128 presets. ¾ Pic.freeze: P

17 ¾ Patrol trajectory: setting of trajectory patrol function. ¾ Trajectory number: Edit the trajectory patrol number. ¾ Edit the patrol: Edit the

18 ¾ Whether enable/disable: Edit the auto run enable ON/OFF. ¾ Periodic run: periodic run selection ON/OFF. (After the periodic run started, both

19 of 10 characters. The optional characters may be identical with ‘preset header settings’. ¾ Return the main menu. 2.3.6 Privacy mask setting

20 ON/OFF. ¾ Return the previous menu. ¾ Password setting: enter the password setting submenu. ¾ Password switch: password protection, ON/OFF. ¾

21 ¾ Time display: time display ON/OFF. After set to ON and exit menu, it may be displayed at the right lower corner of screen. ¾ Y-M-D: the user m

22 Chapter III pan/tilt parameter setting Prior to install this product, please firstly confirm the communication protocol and baud rate of system

23 DIP switch state Dome Address DIP-1 DIP-2 DIP-3 DIP-4 DIP-5 DIP-6 DIP-7 DIP-8 DIP-9 DIP-101 ON OFF OFF OFF OFF OFF OFF OFF OFF OFF 2 OFF ON OFF

24 SW2 may select at most 16 different protocols, with the pan/tilt protocol DIP table as below: Communication protocol Typical baud rate Protocol t

25 For example: 3.5 Special control (only the rapid mode in high level option of menu setting is ON, it is valid) N value number Setting of #N pres

Table of contents Attentions:...

26 Chapter IV installation of pan/tilt 4.1 Safety measures 4.1.1 Qualification of installation or maintenance workers ¾ Submission of qualifica

27 cable. 4.3 Environmental requirements Temperature: -35℃～55℃ humidity:90％ Power supply: DC12V/5A (on-board), AC24V/2.5A (general purpose) 4.4 Wirin

28 ¾ Please use this product according to the working environment requirements. 4.5.2 Check the space for installing and strength of structures Con

29 A. on-board type—suitable for general infrared, infrared synchronous on-board pan/tilt B. Wall-mounted type—suitable for general infrared, i

30 4.7.1 Install the sunshading cover: 1) Respectively take four M3×5 crossing panhead SST screws and four 3.2×8×0.7 tetrafluoroethylene gaskets a

31 Fig.6 4.7.3 Wall-mounting type 1) Take the wall-mounted supporting frame out of its packing, template with the chassis of wall-mounted support

32 4.8 Pan/tilt leading-out mode 4.8.1 The 7-pin aero socket is shown as Fig.10: Fig.10 Description: No. Meaning 1. AC24V: Red 2. GND(AC24V

33 4.8.2 10-pin aero socket is shown as Fig.11: Fig.11 Description: No. Meaning 1. Alarm-1 in: Red 2. Alarm-2 in: Orange 3. Alarm-3 In: Yel

34 Annex I: technical parameters of auxiliary light Infrared illuminator High brightness LEDx36pcs Wavelength 850nm Working distance >100m Pow

35 Annex II: troubleshooting Problems Causes Remedies Power supply damaged or power too low Replace Power line wrongly connected Remedy After powere

Annex IV: protection against lightning and surge...38 Annex V: Warranty...

36 controller, all others are powered off, add the code distributor Auxiliary light failed auxiliary light Auto/manual out of work Rework ¾ Note: t

37 Annex III: 24VAC line gauge and transmission distance relationship If the line gauge is specified, and the loss of 24VAC voltage is less than 10%,

38 Annex IV: protection against lightning and surge This product adopts TVS pole lightning-proof technology to effectively protect against the dama

39 Video lightning arrestorCommunication lightning arrestorPower supply lightning arrestorLightning rodPan/tilt must be mounted within 45°range under

40 Annex V: Warranty 1. Warranty terms  Within one year after delivered, if found any defects caused by materials or workmanships, the factory shal

41 our company. Only the single-trip fee from manufacturer to the user shall be borne by our company. The printing may cause the minor difference

1 Attentions: No direct vision of laser window to avoid the irradiation of direct ray or scattered ray of laser to eyes or skin; when irradiated with

2 Power supply: DC12V (on-board)/AC24V (general pan/tilt) ¾ Installation z During installing, ensure the place for installing the equipment with en

3 Chapter I Functions and features 1.1 Pan/tilt specifications Power supply AC24V±10% 2.5A Power consumption 50VA Weight 7.5Kg Installation Flat

4 ¾ Auxiliary light control mode Mode I Set “Night vision” to auto If you want to use the auxiliary light source, this setting is OK. Under the mod

5 1.5 Camera parameters 16× 18× 22× 23× 26× Camera Color Day & night type Color Day & night type Day & night type Synchronous system