Cop-usa CD69IRICR-1K Manuel d'utilisateur télécharger pdf (Page 2)

INTRODUCTION

Congratulations on your purchase of this product.

This User Guide suits CD69IRICR-1K product. We adopt

the latest SONY technical of sensor and driver. The most

attractive characteristics are small and easy hidden, suits

the elevator and corridor. In addition, it owns the charac-

ters of high definition and stability, strong anti-jamming,

rich and real color. Fixing and using this model are con-

venient too. It is very good for you to apply to your CCTV

system.

Please read this instruction manual carefully to en-

sure proper use of the product.

CONNECTING

BRIEF OF PRODUCT

* Sensor (SONY 138)

Adopt SONY 1/3" Sensor.

* Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. The color camera

can get high definition picture in low Lux condition.

* Scanning Mode

NTSC or PAL mode.

* Support UTC function

With UTC Remote Controller for the convenience of

OSD menu setting.

* OSD SETTING

DC12V Power Supply

Monitor

CD69IRICR-1K

TROUBLE AND SOLUTION

Link wire rule：

Power

Video

Notes:

● Please note the camera’s operating temperature and its using

environment

requirement. Avoid using the camera at too high or

too low temperatures. The operating temperature is -30~+60℃.

(Recommendatory operating temperature is -10~+50℃.)

● Never make the camera face the sun or bright object. Other-

wise, it will damage the CMOS.

● Do not mount the camera near by the radiator or heater.

1. No Picture after providing power

. May be the power supply voltage abnormity, please check the power

supply voltage and pole whether exactitude.

. Please check all the connecting cable and monitors whether be connected

correctly or not.

2. The picture level direction have flowing interference ripples

. May be caused by the power supply AC ripples, it need filter the wave of the

power supply.

. Check the monitor and peripheral equipments used.

3. The picture background color changes continuously

. The fluorescent lamp’s electromagnetic field cause color roll. This is proper

phenomenon of the cameras.

. Reduce the fluorescent lamp numbers or increase the distance between the

camera and the fluorescent lamps can improve it.

. Use power supply external sync. camera can solve it.

4. The picture smear too mass

. The power supply’s voltage unstable.

. Connecting cables not connect correctly or have high impedance.

To prevent fire or shock hazarded. Do not expose the unit

The symbol is intended to alert the user to the presence of

to rain or moisture.

important operating and maintenance (servicing)

Instructions in the literature accompanying the appliance.

uninsulated ‘dangerous voltage’ within the product’s

enclosure that may be of sufficient Magnitude to constitute

a risk of electric shock to persons.

Video

DC12V

CAUTION:

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK

DO NOT REMOVE COVER OR BACK NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

RISK OF ELECTRIC. DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF

FIRE HAZARDS, DO NOT USE OTHER THAN

SPECIFIED POWER SOURCE.

Notes：

●The power supply must through safe attestation. Its output voltage,

current, voltage polarity and operating temperature must match the

camera’s requirement.

●When using the camera in the thunderbolt condition,please note to

mount Anti-thunder device or put off the power supply plug and cable.

●In order to capture high quality pictures, the power supply’s cable and

video output cable should not be too long.

DOWN

RIGHT

LEFT

PRESS

KEY BOARD

OSD

SET

IMAGE

3D-NR ON/OFF

AE MODE

GLOBAL/CENTER/CENTERWEIGHT/BLACK

LIGHT/FRONT LIGHT/DISTINGUISH

IMAGE ENHANCE SHARPNESS/CONTRAST/SATURATION

MIRROR ON/OFF

FLIP ON/OFF

BRIGHTNESS 0.10.20......250

ZOOM IN 50. 60. 70. 80. 90. 100

DAY&NI

GHT

AUTO

IR-CUT

AWB-PRO

AWB-TEMPORAL

AWB-AI

AWB-SZ

AWB-GW

AWB-CCT

ZONE

MASK-

ING

COLOR

MOSAIC/WHITE/YELLOW/CYAN/GREEN/

MAGENTA/RED/BLUE/BLACK

AREA NO.0 - AREA

NO.7

DIREC-

TION

AREA NO.0 - AREA

NO.3

ENGLISH

CHINESE

LOAD DEFAULT

SOFT VERION

SAVE&EXIT

LAN-

GUAGE

Specifications Subject to Change Without Notice. All Logos,

Trademarks and Copyrights belongs to their respective owners.

1 2

Commentaires sur ces manuels

Pas de commentaire

Cop-usa CD69IRICR-1K Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Foto Cop-usa CD69IRICR-1K