Cop-usa CHLP65IR-HSL Manuel d'utilisateur télécharger pdf (Page 3)

Attention: After you chose the default setting, please reset:

1. choose DC driver for LENS option.

2. set the shutter speed to 1/250 second.

Notes for installation:

1． Power up with DV12V or AC24V . Note, if you want to use DC12V power supply, the power should exceed 3.5A.

2． Adjust the lens in case of blurry picture

3． The knob which close to the led board on the lens is Zoom, the other knob is Focus, adjust these 2 knobs so that you can get clear image.

4． Shutter speed: according to the label posted on the control board, gives you a list of different shutter speeds, we recommend not to change it since the default shutter speed is 1/500 sec,

below this, you will be capturing plate’s number when the car’s reaches 150km/h.

5． AUTO IRIS: to set up picture brightness for correct exposure, for better results, adjust under a daylight condition.

6． CDS

control: adjust the IR LED operating time; control how dark the LEDs are going to work. The CDS sensor is in the back of the camera, you can adjust

to control it, please do not let CDS sensor be illuminated by road lamps or other light sources when installs.

7． LED light: adjust LED output power, according to the real working environment; adjust this to let you see number plate clearly at night time.

8． Installation way:

(1) Camera height: 2.5m to 6m

(2) Distance from the cars: 5-30m

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

Cop-usa CHLP65IR-HSL Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Foto Cop-usa CHLP65IR-HSL